Please note that these setups are starting points only, and may need to be altered depending on track and weather conditions, and other variables. When adjusting the setup of your kart, it is best to make only one change at a time before testing the change.
SEAT POSITION
| Measurement | |
| A | B |
|
Driver <175cm: Flush with bottom of chassis |
135mm |
|
Driver >175cm: 5mm below bottom of chassis |
135mm |
CHASSIS SETUP
| Front Upper Bumper | Tight |
| Front Lower Bumper | Loose |
| Torsion Bar | Gold |
| Camber per side | -2mm (per side) |
| Toe per side | +2mm (per side) |
| Front Track | 20mm |
| Front Hubs | 80mm |
| Front Ride Height | Central |
| Caster | Neutral (both dots forward) |
| Sidepods | Loose |
| Seat Stays | 1 per side |
| Rear Spoiler | Loose |
| Axle | Medium 1030mm |
| Rear Width | 1395mm |
| Rear Hubs | 90mm |
| Rear Ride Height | Central |
| Seat | Jecko Standard |
| Wheels | DWT SE |