Please note that these setups are starting points only, and may need to be altered depending on track and weather conditions, and other variables. When adjusting the setup of your kart, it is best to make only one change at a time before testing the change.
SEAT POSITION
| Measurement | |
| A | B |
| Flush with bottom of chassis | 130mm |
CHASSIS SETUP
| Front Upper Crash Bar | Loose |
| Front Lower Crash Bar | Tight |
| Torsion Bar | Removed |
| Camber | -6mm (per side) |
| Caster | +9mm |
| Toe | +2mm (per side) |
| Front Track | 15mm |
| Front Wheels | OXY |
| Ackerman | Centre column with Ackerman extensions on stub axle |
| Front Ride Height | Low |
| Sidepods | Loose |
| 3rd Bearing | Loose |
| Axle | Medium 1m |
| Rear Ride Height | Central |
| Rear Bar | Loose |
| Rear Wheels | OXY |